The OneCommand Utility User Manual
Page 51
•
Subnet Mask - The iSCSI initiator subnet mask.
•
Gateway Address - The iSCSI initiator gateway address.
•
VLAN Enabled - The VLAN enabled state for the iSCSI interface.
•
VLAN ID - The VLAN identifier to use 0-4094 (only valid when VLAN is enabled). 0 indicates the
VLAN is disabled.
•
VLAN Priority - The VLAN priority for the iSCSI interface.
Network Info Area Field Definitions
•
Link Status - The status of the link on the selected adapter port.
•
Max Port Speed - The maximum port speed of which the selected port is capable.
Port Information Buttons (Not available in read-only mode.)
•
Modify - Enables you to change TCP/IP settings for the selected port. You can change the port’s
VLAN tag, priority, IP address and more. See “Modifying TCP/IP iSCSI Port Configuration” on
page 100 for more information.
Viewing NIC Port Information
When you select a NIC port from the discovery-tree, the NIC Port Info tab contains general attributes
associated with the selected NIC port.
To view general NIC port information:
1.
Select Host or Virtual Ports view.
2.
Select a NIC-Only adapter in the discovery-tree.
3.
Select the NIC Port Info tab.
Figure 22: NIC Port Info tab
Note: NIC ports do not exist only on NIC-Only adapters. A NIC port can also exist on an
iSCSI or FCoE adapter.
