Emotron FDU Series, Instruction Manual, Page: 11 / 260

CG Drives & Automation 01-7491-01r0 Introduction 7
1. Introduction
Emotron FDU is used most commonly to control and
protect pump and fan applications that put high demands
on flow control, process uptime and low maintenance costs.
It can also be used for e.g. compressors and blowers. The
used motor control method is V/Hz-control. Several options
are available, listed in chapter 13. page 201, that enable you
to customize the AC drive for your specific needs.
Users
This instruction manual is intended for:
• installation engineers
• maintenance engineers
• service engineers
Motors
The AC drive is suitable for use with standard 3-phase
asynchronous motors. Under certain conditions it is possible
to use other types of motors. Contact your supplier for
details.
1.1 Delivery and unpacking
Check for any visible signs of damage. Inform your supplier
immediately of any damage found. Do not install the AC
drive if damage is found.
Check that all items are present and that the type number is
correct.
1.2 Using of the instruction
manual
Within this instruction manual the abbreviation “AC drive”
is used to indicate the complete variable speed drive as a
single unit.
Check that the software version number on the first page of
this manual matches the software version in the AC drive.
See section 11.9.1 page 188.
With help of the index and the table of contents it is easy to
track individual functions and to find out how to use and set
them.
The Quick Setup Card can be put in a cabinet door, so that
it is always easy to access in case of an emergency.
1.2.1 Instruction manuals for
optional equipment
In the following table we have listed available options and
the name of the Instruction manual or data sheet/
Instruction plus document number. Further in this main
manual we are often referring to these instructions.
NOTE: Read this instruction manual carefully before
starting installation, connection or working with the
AC drive.
Table 1 Available options and documents
Option
Valid instruction manual/
document number
I/O board
I/O board 2.0, instruction
manual / 01-5916-01
Encoder board
Emotron Encoder board
2.0, Instruction manual /
01-5917-01
PTC/PT100 board
PTC/PT100 board 2.0,
instruction manual /
01-5920-01
CRIO board (VFX) Emotron AC Drive Crane
option 2.0, Instruction
manual
Crane interface (VFX)
Fieldbus - Profibus
Fieldbus Option,
Instruction manual /
01-3698-01
Fieldbus - DeviceNet
Fieldbus - CANopen
Ethernet - Modbus TCP
Ethernet - EtherCAT
Ethernet - Profinet IO 1-port
Ethernet - Profinet IO 2-port
Ethernet - EtherNet/IP 2-port
RS232/RS485 isolated
Emotron isolated
RS232 / 485 2.0 option
Instruction manual /
01-5919-01
Control panel kit, Incl blank
panel
Emotron FDU/VFX 2.0
External Control Panel,
instruction manual / 01-
5928-01
Control panel kit, Incl control
panel
Handheld Control Panel
HCP2.0
Emotron HCP 2.0,
instrucion manual / 01-
5925-01
Safe stop
Option Safe Stop
(STO – Safe Torque Off),
Technical description /
01-5921-01
Overshoot clamp
Overshoot clamp
Datasheet/Instruction /
01-5933-11
Liquid cooling
Emotron FDU/VFX 2.0
Liquid Cooling, instruction
manual / 01-4636-01
Output choke
Output coils
Datasheet/Instruction /
01-3132-11
AFE- Active front end
Emotron VFX/FDU 2.0
AFE- Active Front End
option, Instruction manual
/ 01-5386-01