Emotron FDU Series, Instruction Manual, Page: 192 / 260

188 CG Drives & Automation 01-7491-01r0
11.8.4 Trip Messages [820] - [890]
Same information as for menu [810].
All nine alarm lists contain the same type of data. For
example DeviceNet parameter 31101 in alarm list 1
contains the same data information as 31151 in alarm list 2.
See Menu List chapter 15. page 227.
11.8.5 Reset Trip Log [8A0]
Resets the content of the 9 trip memories.
11.9 System Data [900]
Main menu for viewing all the AC drive system data.
11.9.1 VSD Data [920]
VSD Data [921]
Shows the AC drive type according to the type number.
The options are indicated on the type plate of the AC drive.
Fig. 156 Example of AC drive type.
Examples
FDU48-046-5XAC drive-series
- suited for 380-480 volt mains supply, and a
- rated output current of 46 A.
- IP Class = IP54 and IP55 (2X = IP20/21)
Software [922]
Shows the software version number of the AC drive.
Fig. 157 gives an example of the version number.
Fig. 157 Example of software version
V 5.01= Software version
- 03.07 = option version, is only visible and valid for special
software, type OEM adapted software.
03 = (major) special software variant number
07= (minor) revision of this special software
8A0 Reset Trip L
Default: No
No 0
Yes 1
NOTE: After the reset the setting goes automatically
back to “NO”. The message “OK” is displayed for 2
sec.
NOTE: If the control board is not configured, then
type shown is FDU48-###-##.
921
FDU 2.1
FDU48-046-5X
Sby
922
Software
V 5.01 - 03.07
Sby