Emerson Process Management GmbH & Co. OHG
1-1
1
Techn. Description
X-STREAM XE
Short Form Manual
HASXEE-SFM-HS
05/2017
Chapter 1
Technical Description
The following are the main features of the
Emerson Process Management X-STREAM
Enhanced
(hereinafter also referred to as
"X-STREAM XE") gas analyzers in brief:
•
compact design with easily accessible
internal components
•
customizable for a wide range of appli
-
cations: different housings are available
while internal construction remains largely
identical
•
a highly integrated mainboard contains
all interfaces and basic functions for the
operation of the unit
• multilingual microprocessor-controlled
user interface with liquid crystal (LCD) to
indicate measurement value and status
messages
• units for outdoor use are optionally sup-
plied with an impact tested front panel
• widerange power supply unit for worldwide
use without modification (
1
⁄
2
19in units with
internal or external PSUs)
X-STREAM
Enhanced
gas analyzers can
measure up to five different gas components
using many combinations of the following
analyzing techniques:
IR = non-dispersive infrared analysis
UV = ultraviolet analysis
pO
2
= paramagnetic oxygen analysis
eO
2
= electrochemical oxygen analysis
tO
2
= trace oxygen analysis
TCD = thermal conductivity analysis
tH
2
O = trace moisture measurement
Modified resistant measuring cells are avail
-
able for use with corrosive gases and/or
gases containing solvents.
Special configurations for the analysis of flam
-
mable gases are also available.
EXPLOSION HAZARD
X-STREAM XE analyzers MUST NOT be used in explosive environments
(hazardous areas) without additional safety features.
This instruction manual does NOT describe the special conditions necessary
to operate gas analyzers in hazardous areas.
Please refer to the separate instruction manual, supplied with units for use
in hazardous areas.
