Emerson Process Management GmbH & Co. OHG
3-16
X-STREAM XE
Short Form Manual
HASXEE-SFM-HS
05/2017
3.8 Checking the Settings
3.8.2
Configuring the
Display
Check the settings for the measurement
display, temperature and pressure units, and
for menu access: press
enter
to open DIS-
PLAY.., select "
Measurement display.."
and
press
enter
.
If a setting does not meet your requirements,
access that menu and adjust the parameter.
Press
left
to return to SETUP.
Select the value to be displayed in each line
of the measurement display. The following
options are available:
Comp1 ... Comp5,
Temp1 ... Temp5,
Press1 ... Press5,
Flow1 ... Flow5
Blank
(nothing)
Note
!
X-STREAM currently supports one pressure
sensor only. Values
Press1
to
Press5
thus
refer to the same sensor.
When entering LABELS.., you may change
the channel´s label, that is the first text phrase
in a line showing a measurement value: If
here nothing is entered, the default phrases
(Ch1 ... Ch4) are used.
Note!
Notice the headlines of the menus showing
a "1": This indicates that you can setup more
than 1 measurement display page.
Display 1 Assignments
Line 1:
Comp1
Line 2:
Comp2
Line 3:
Comp3
Line 4:
Comp4
Line 5:
Blank
Labels..
Display 1 Labels
Line 1:
Line 2:
Line 3:
Line 4:
Line 5:
