Using the transmitter display
The mantissa must be a four-digit value with a precision of three; i.e., values between 0.000
and 9.999.
a.
Activate
Select
to move the cursor to the rightmost digit in the mantissa.
b.
Activate
Scroll
until the desired character is displayed.
c.
Activate
Select
to move the cursor one digit to the left.
d.
Activate
Scroll
until the desired character is displayed.
e.
Activate
Select
to move the cursor one digit to the left.
f.
Activate
Scroll
until the desired character is displayed.
g.
Activate
Select
to move the cursor one digit to the left.
h.
Activate
Scroll
until the desired character is displayed.
4.
Enter the sign.
a.
Activate
Select
to move the cursor one digit to the left.
b.
Activate
Scroll
until the desired character is displayed.
For positive numbers, select a blank space.
5.
To save the displayed value to transmitter memory, activate
Scroll
and
Select
simultaneously and
hold until the display changes.
• If the displayed value is the same as the value in transmitter memory, you will be returned to
the previous screen.
• If the displayed value is not the same as the value in transmitter memory,
SAVE/YES?
flashes
on the display. Activate
Select
.
6.
(Optional) Switch back from exponential notation to decimal notation.
a.
Activate
Select
until the
E
is flashing.
b.
Activate
Select
until
d
is displayed.
c.
Activate
Select
.
C.3
Display codes for process variables
Table C-2 lists and defines the codes used for process variables on the display.
Table C-2
Display codes for process variables
Code
Definition
Comment or reference
AVE_D
Average density
AVE_T
Average temperature
BRD_T
Board temperature
CONC
Concentration
DRIVE%
Drive gain
EXT_P
External pressure
EXT_T
External temperature
GSV F
Gas standard volume flow
Configuration and Use Manual
219
