ELTEX SMG-1016M, Operation Manual

Page: 335 / 441

SMG Digital Gateway
335
ONOFF
LOCREM
1-65535
off/on
local/remote
on/off - enable/disable logging;
local/remote - 'remote' means transmit logs
to syslog server
authlog show
Show current parameters of logging
calls <CALLS> 0-99
Enable tracing of calls with the defined
debug level, 0 — disable data transfer.
config
Return to Configuration menu.
exit
Return from this configuration submenu to
the upper level.
h323 <H323> 0-99
Enable H.323 signaling tracing with defined
debug level, 0 – data will not be transmitted
hw <E1>
<HW>
0-15
0-99
Send E1 stream hardware data with the
defined debug level, 0 — disable data
transfer.
E1 — Е1 stream name.
HW — priority level.
ipaddr <IPADDR> IP address in
AAA.BBB.CCC.DDD
format
Define syslog server IP address
isup <ISUP> 0-99
Enable tracing of ISUP subsystem with the
defined debug level, 0 — disable data
transfer.
msp <MSP> 0-99
Enable tracing of MSP signal processor
resources with the defined debug level, 0 —
disable data transfer.
port <PORT> 1-65535
Define a local port number
Q931 <Q931> 0-99
Enable tracing of Q.931 signalling with the
defined debug level, 0 — disable data
transfer.
quit
Terminate this CLI session
radius <RADIUS> 0-99
Enable tracing of RADIUS protocol with the
defined debug level, 0 — disable data
transfer.
rtp-create <RTP> 0-99
Enable tracing of RTP forwarding creation
with the defined debug level, 0 — disable
data transfer.
show
Show Syslog configuration information
sipt <SIPT> 0-99
Enable tracing of SIP-T signalling with the
defined debug level, 0 — disable data
transfer.
start
Enable data transmission to a syslog server
stop
Disable data transmission to a syslog server
userlog <IPADDR>
<PORT>
<MODE>
IP address in
AAA.BBB.CCC.DDD
format
1-65535
off/standart/full
Enable the output of history of entered
commands
IPADDR — syslog server IP address
PORT — syslog server port
MODE — verbosity level of the entered
commands log
off — disable entered commands logs
generation.
standart — messages contain the name
of modified parameter.
full — messages contain the name of
modified parameter as well as
parameter values before and after the
modification.