200
SMG Digital Gateway
Modifiers for InCgPN — select caller (CgPN) number modifier for the incoming connection in
relation to Calling-Station-Id, xpgk-src-number-in fields of RADIUS-Authorization and RADIUS-
Accounting messages.
InCgPN — select the number transmitted in xpgk-dst-number-in field of RADIUS-Authorization and
RADIUS-Accounting messages:
–
original
— initial number that was received in CgPN field of the incoming call prior to its
modification.
–
processed — CgPN number after modification.
Modifiers for OutCdPN — select callee (CdPN) number modifier for the outgoing connection in
relation to xpgk-src-number-out field of RADIUS-Authorization and RADIUS-Accounting messages.
Modifiers for OutCgPN — select caller (CgPN) number modifier for the outgoing connection in
relation to xpgk-dst-number-out field of RADIUS-Authorization and RADIUS-Accounting messages.
RADIUS-Authorization settings:
Send requests for ingress calls.
Authentication/authorization requests may be transmitted during various
call phases:
on ingress seize (CgPN only);
on the end-of-dial (CgPN and CdPN)
on local redirection
Send requests for egress calls
. Authentication/authorization requests may be transmitted:
on egress seize.
The control of calls in RADIUS might be limited on the basis of modifier mask. Select one or more
modifiers in "Modifiers settings" and select "Restrict" in the "Send requests by modifiers" field. In this case, a
request for authorization will be sent to RADIUS only if the number complies one of the mask in the modifiers
table. The modification will be implemented as usual, according to modifiers table rules.
When "Send requests by modifiers" is set to "Restrict", the calls which numbers is not in the
modifier mask wil be considered as automatically authorized.
Access restriction on server failure.
During server fault (response non-reception), you may impose
restrictions upon the outgoing communications:
no restrictions
— allow all calls.
local and zone networks only
— allow calls to emergency services, local and zone network.
local network only
— allow calls to emergency services and local network.
emergency only
— allow calls to emergency services only.
deny all (disconnect)
— deny all calls.
This restriction governs the call routing by a prefix controlling the corresponding call type (local, long-
distance, etc.).
