ELTEX SMG-1016M, Operation Manual

Page: 171 / 441

SMG Digital Gateway
171
To create, edit or remove a route, use 'Objects' — 'Add
object', 'Objects' — 'Edit object' and 'Objects' — 'Remove object'
menus and the following buttons:
— 'Add route'
— 'Edit route parameters'
— 'Remove route'
Route parameters:

Enable — when checked, the route is enabled.

Destination — IP network.

Mask — specify a network mask for the defined IP network (use mask 255.255.255.255 for IP
address).

Gateway — define IP address of route gateway.

Interface — select outbound network interface.

Metric — route metrics.
3.1.10.2 Network Settings
In this submenu, you may specify the device name, change the
network gateway address, DNS server address and SSH/Telnet access
ports.

Hostname — device network name.

Use gateway from — select network interface that the
gateway will consider as a primary for the device.

Primary DNS — primary DNS server.

Secondary DNS — secondary DNS server.

Port for SSH — TCP port for the device access via SSH protocol, default value is 22.

Port for Telnet — TCP port for the device access via Telnet protocol, default value is 23.
3.1.10.3 Network interfaces
The device allows you to configure 1 primary network interface eth0 and up to 9 additional interfaces; these
interfaces may include VLAN interfaces as well as Aliases for primary interface eth0 or Aliases for VLAN interface.