294
SMG Digital Gateway
modify type
<IDX>
<TYPE>
0-15
trapsink/
trap2sink/
informsink
Modify SNMP trap transmission rule (SNMP
message type)
quit
Terminate this CLI session
remove
<IDX>
0-15
Remove SNMP trap transmission rule:
restart snmpd
Yes/no
Restart SNMP client
ro
<RO>
String,
63
characters max.
Set the password for parameter reading
rw
<RW>
String,
63
characters max.
Set the password for parameter reading and
writing
show
Show SNMP configuration
syscontact
<SYSCONTACT>
String,
63
characters max.
Specify contact information
syslocation
<SYSLOC>
String,
63
characters max.
Specify device location
sysname
<SYSNAME>
String,
63
characters max.
Specify device name
3.3.22
Dial plan configuration mode
To enter this mode, execute 'numplan' command in the configuration mode.
SMG-[CONFIG]> numplan
Entering Numbering-plan mode.
SMG-[CONFIG]-[NUMPLAN]>
Command
Parameter
Value
Action
?
Show the list of available commands.
config
Return to Configuration menu.
create prefix
<IDX_Numplan>
0-15/0-255
Create prefix in the specified dial plan
delete prefix
<IDX Prefix>
Remove the specified prefix
exit
Exit from this configuration submenu to the
upper level.
history
View history of entered commands.
prefix
Enter prefix configuration mode
quit
Terminate this CLI session
set active
0-15/0-255
Define the number of active dial plans
set domain
<IDX>
<DOMAIN>
0-15/0-255
String,
15
characters max.
Specify domain for registration
set name
<IDX>
<NAME>
0-15/0-255
String,
15
characters max.
Define the dial plan name
show
active
count
Show the number of active dial plans
show
active
list
Show the list of active dial plans
show list
Show the list of dial plans
show prefixes
<IDX>
0-15/0-255
no/yes
Show dial plan prefixes with the specific
number
3.3.22.1
Prefix configuration mode
To enter this mode, execute 'prefix <PREFIX_INDEX>' command in the configuration mode,
