SMG Digital Gateway
239
Subscriber parameters
–
Subs. ID –
a unique subscriber identifier
–
Description –text description of the subscriber
;
–
Number –
subscriber's number; for a group of subscribers, number of each following subscriber will be
increased by 1.
–
Caller ID number –
subscriber's Caller ID number; for a group of subscribers, number of each following
subscriber will be increased by 1;
–
Use CallerID number for redirection –
use the number set in the "CallerID number" when redirecting
service is being implemented.
–
Calling party number type –
subscriber number type;
–
Callling party category (RUS) –
CallerID category;
–
РВХ profile – select PBX profile
(see section 3.1.8.3 PBX profiles);
–
Access category
– select the access category;
–
Dial plan –
defines the dial plan that the subscriber will belong to
;
–
CallerID generation – select the format of the Caller ID issuing;
–
Subscriber service mode –
set restrictions on ingress and egress connection for the subscriber:
off:
out of service. Number of a subscriber is in a dial plan, but subscriber terminal cannot be
registered. Thus, incoming calls will be barred with 'out of order' cause and egress calls cannot
be initiated.
on:
all communication types are available.
off 1:
incoming communication is enabled, outgoing communication is available only for calls to
emergency services.
off 2:
incoming communication is disabled, outgoing communication is available only for calls to
emergency services.
denied 1:
full barring for incoming and outgoing calls. Calls will be routed according to dial plans,
but will be rejected;
denied 2:
full barring for incoming and outgoing calls except for the calls to emergency services.
denied 3:
incoming calls are barred, outgoing calls are permitted.
