SMG Digital Gateway
185
Gateway switch is equipped with 3x electrical Ethernet ports, 2x optical ports and 1x port for CPU
interactions:
GE port 0, port 1, port 2 — electrical Ethernet ports of the device.
SFP port 0, SFP port 1 — optical Ethernet port of the device.
CPU — internal port linked to the device CPU.
Adding records to the packet routing table
In 'VID' field, enter an identifier of VLAN group, that the routing rule is created for, and assign actions for
each port to be performed during transfer of packets with specified VID.
–
unmodified
— packets will be sent by the port without any changes (i.e. as they have been
received).
–
untagged
— packets will always be sent without VLAN tag by this port.
–
tagged
— packets will always be sent with VLAN tag by this port.
–
not member
— packets with specified VID will not be sent by this port, i.e. the port is not
the member of VLAN.
override
— when checked, override 802.1р priority for this VLAN; otherwise, leave the priority
unchanged.
priority
— 802.1р priority assigned to packets in this VLAN, if
'override'
checkbox is selected.
Then, click
'Add'
button.
Click "Apply" button to apply the settings than click "Confirm" to confirm the settings.
Click 'Confirm' button in 1 minute interval to confirm settings, or the previous values will be
restored.
Save —
save settings into the device flash memory without applying them.
Removing records from the packet routing table
To remove records, select checkboxes for the rows to be removed and click
'Remove selected'
button.
