ELTEX SMG-1016M, Operation Manual

Page: 89 / 441

SMG Digital Gateway
89
'Change dial plan' prefix parameters

New dial plan — dial plan that the call will be transferred to.

New access category — category assigned to the caller after transfer to another dial plan.
Calls modifiers in "change dial plan":

CdPN modifiers – dedicated to modification based on the calling party number analysis;

CgPN modifiers – dedicated to modification based on the called party number analysis.
'VAS prefix' parameters

VAS type — Select VAS service type for management from the subscriber's phone unit:
–
CFU — call forward unconditional
–
CFB — call forward on busy
–
CFNR — call forward on no reply
–
CFOS — call forward on out of service
–
Call pickup — call pickup
–
Conference — conference сall
–
Clear all — cancel all services
–
Intercom — intercom call (with automatic reply from the party B)
–
Paging — similar to Intercom but with a call to conference numbers
–
Password – set the password;
–
Password once – access via password;
–
Password access – password activation;
–
Restrict out – egress communication restriction;
–
DND – do not disturb;
–
Blacklist – black list.

Action — select action for the service:
–
Configure — set VAS service.
–
Cancel — cancel VAS service
–
Control — VAS service activity control
–
numberAdd – add a number;
–
numberDel – remove a number.
'Pickup group' prefix parameters

Pickup group — pickup group that will be used for call pickup when this prefix is dialed. If you
choose 'Any', pickup will be enabled for all groups.

Caller ID request — defines Caller ID information necessity (caller number and category) for
transition to the trunk group specified in 'Trunk group' field . When the call arrives from the
communication node and the Caller ID information is missing in that call, Caller ID request will be
directed to that node (INR message from SS7 signalling).

Caller ID mandatory — indicates that Caller ID information is mandatory during the direction
transition. If Caller ID information cannot be received from the calling party, connection
establishment process will be interrupted.

Priority — configure prefix priority in the range from 0 to 100. Prefix which parameter value is
lower will have a greater priority (0 — the highest priority, 100 — the lowest priority).