58
SMG Digital Gateway
Channel management
To enable management for a channel in a stream, left-click its icon. The field will become highlighted, for
example, the screenshot below shows the information for Channel 2 in Stream 1 (SS7). Next, in 'SS7 channel
management' table, select the field with the required action and left-click it. Pop-up informational message
about the command execution will be shown on screen.
You may perform group operations for channels in a stream. To do this, select the range of
channels while holding <SHIFT> key.
SS7 channel management — SS7 (CIC) channel management table:
Block channel (send BLO)
— send BLO message to block channel
Unblock channel (send UBL)
— send UBL message to unblock channel
Reset channel (send RSC) — send RSC message
Local block
— block channel locally without BLO message transmission
Local unblock
— cancel local block
Release (send REL
) — send REL message
Release complete (send RLC) — send RLC message
Run continuous-check test (send CCR)
- Run continuous-check test
by sending CCR message;
Stop continuous-check test
- stop channel continuity test;
Show continuous-check test state
- show current continuous-check test state.
