40
Accessing the automatic settings for shades (XS 1B-
D control unit)
You can access the automatic settings in the following way:
Press the
button on the weather data screen for a minimum
of 3 seconds to access the automatic settings.
You have reached the automatic settings as soon as the two and
symbols are shown on the left of the screen. The first parameter to be set
(brightness) can then be seen.
When no weather station is configured on the system,
(Error) is displayed
instead of the first parameters and no automatic settings can be applied.
You can exit Automatic settings at any time by pressing the button. The value
changes which have been made will not then be saved.
If no button is pressed in Automatic settings for 5 minutes, the display will
automatically switch to display the temperature. Any changes made will equally
not be saved.
You are now in
Automatic
settings
Quit
Confirm/
Continue
