44
The outdoor and indoor temperature guards only operate in
automatic mode. Manual operation is still possible. When
manually closing or opening the shades, you must pay
attention to potential icing.
The default setting for the outdoor temperature guard is 5°C.
Adjust the value by pressing
(higher) and (lower), or select
(Off) to
switch off the outdoor temperature guard. You can reach the
settings by
pressing once again when "-20°C" is displayed.
Then, press
to proceed to set the next parameter.
F. Wind alarm
After setting the outdoor temperature guard, you will now need to provide a
value for the wind protection function.
The wind alarm protects shades which are
mounted outdoors from damage. If the set
wind value is exceeded, the awnings or
blinds are retracted and manual operation is
disabled.
Wind speed is entered in m/s (metres per second). The "Wind speed" table at the
end of this manual can be used as a reference point for determining the optimal
value.
Depending on the location of the building and the installation position of the
weather station, the optimal wind value for protecting the shades can vary. You
should observe the behaviour of the awnings or blinds in wind, and adjust the
wind value accordingly.
The wind alarm remains active for 5 minutes. If the set wind value is once again
exceeded in these 5 minutes, the alarm time will be restarted.
The default setting for retraction due to wind is 4 m/s.
