31
(Solexa, shades) when connected to an awning or blind.
(Arexa, window) when connected to a window.
(Unknown) when you do not know what type of drive is connected. In this
case, no automatic settings can be made.
Confirm your selection using the
button, and you will be taken to the next
settings step.
3. Single or parallel operation of the drives (for left-hand
channel only)
After setting the type of drive, you will then be asked whether the drives on the
motor control unit shall be operated individually or in parallel.
Both drives on the motor control unit can be operated as a group (when these
are drives of the same type). The motors then actuate in parallel, and only one
XS 1B-D control unit is required.
The question regarding the parallel actuation of the drives only appears when
setting up the left channel. Selecting the
= Parallel setting enables the right
channel behaves in exactly the same way as the left channel.
Press the
button until the desired screen appears:
(Single) when each drive on the motor control unit shall have
separate automation settings and is set and operated using a
separate XS 1B-D control unit.
(Parallel) when both drives on the motor control unit shall have the
same automation settings and are operated using a single XS 1B-D
control unit.
Confirm your selection using the
button, and you will be taken to the next
settings step.
