27
Control unit manual/automatic
button:
Press briefly once
The screen indicates:
Control unit set-up button
Press briefly once
The control unit is now configured for
the right channel, and the LED on the
motor control unit is off.
After configuring the wireless connection, you can proceed with setting the basic
settings for the drives. The display screen of the control unit jumps
automatically to Step 2 of the basic settings (Select drive type). Please refer to
the following chapter, "Basic settings", from "2. Drive types" onwards.
Should you want to complete the basic settings at a later time, press the stop
button briefly once to exit the Basic settings.
After completing the configuration and basic settings, check the function of the
and buttons by actuating the drive:
When the button is pressed, the connected drive must
actuate to the safety position (the shade is retracted, the
window is closed)! Should this not happen, please change the
"Up" and "Down" cables in the motor control unit.