42
B. Extension delay
After completing the setting for brightness, you now need to provide a delay
time after which the shades are extended.
This delay ensures that the shades do not
continuously retract and extend in rapidly
changing light conditions.
The default setting for extension is 1 minute. Brightness must remain above its
set value (item A of Automatic settings) for the following 1 minute in order to
extend the shades. The shades can thus react rapidly to the sun.
Adjust the value by pressing
(higher) and (lower). Then, press
to
proceed to set the next parameter.
C. Retraction delay
After completing the setting for extension delay, you now need to provide a
delay time after which the shades are retracted.
The default setting for retraction is 12 minutes. Brightness must remain below
its set value (item A of Automatic settings) for the following 12 minutes in order
to retract the extended shades. The dazzle from clouds passing in front of the
sun can thus be "blended out".
Adjust the value by pressing
(higher) and (lower). Then, press
to
proceed to set the next parameter.