7
C: Individual automatic control using Solexa/Arexa
Individual automatic control allows the connection of different drives, such as an
awning to weather station, or a blind or a window to a motor control unit. Each
drive has its own automatic control, which can be set using the XS 1B-D wireless
control unit with display.
Both drives on the motor control unit (M2, M3) can also be treated as a group
when these are of the same type. The motors are both set up over a common XS
1B-D control unit, have the same automatic behaviour and actuate in parallel.
Up to two XS 2B double control units with simple Up/Down buttons can be
configured to the motor control unit in order to be able to actuate the drives (M2,
M3) from elsewhere in the room.
Required equipment:
•
Solexa or Arexa control set, from software version 3.2
•
XS MSG2-AP motor control unit (with 2 drive connections)
•
For each drive which shall be independently controlled, 1 XS 1B-D control
unit with display (maximum of two for XS MSG2-AP). Parallel operation for
both drives with XS MSG2-AP as a group is also possible (with one XS 1B-
D control unit only).
•
Up to two further XS 2B double control units may be used (for operation
from elsewhere in the room)
Weather data
(wireless)
XS MSG2-AP motor
control unit
Solexa or Arexa
weather station
Control unit with
display
XS 1B-D control
unit, shades or
windows (M2)
XS 1B-D control
unit, shades or
windows (M3)
Further MSGs.
Wireless
connection
Wireless
connection
