22
Wireless connection between motor control unit and
double control unit
XS
MSG2-AP
XS
2B
Activate the motor control unit configure/delete mode for the double
control units:
XS MSG2-AP motor control unit configure/delete button
Press briefly
twice.
Both LEDs now flash, and the configure/delete mode for the double
control unit is activated.
Configuring a double control unit:
Delete all existing configured
double control units:
Double control unit stop button:
Press for 3 secs.
The LEDs on the motor control unit
stop flashing, and the control unit is
then configured.
XS MSG2-AP configure/delete
button:
Press for longer than
6 secs.
The LEDs on the motor control unit
stop flashing. All wireless connections
with the double control units to the
motor control unit are deleted.
After configuring the XS 2B double control unit, check its function by actuating
the drive using the and buttons. The left-hand pair of buttons controls the
"Left" channel, the right-hand pair the "Right" channel.
When the button is pressed, the connected drive must
actuate to the safety position (the shade is retracted, the
window is closed)! Should this not happen, please change
the "Up" and "Down" cables in the motor control unit.
