6
Procedure:
•
Installation of Solexa or Arexa (control unit and weather station), see
Solexa/Arexa manual
•
Installation of the motor control unit and connection to the drives
•
Installation of the XS 2B control unit
•
Commissioning of Solexa/Arexa including configuration of wireless
connections between controls and weather station and basic setting of the
drives connected to the Solexa/Arexa systems using the Solexa/Arexa
control unit (see Solexa/Arexa manual)
•
Configuring the weather station to the motor control unit
•
Configuring the XS 2B control unit on the motor control unit
•
Setting the automatic functions for all drives using the Solexa/Arexa
controls (see Solexa/Arexa manual)
The described situation only allows the setting of a shade and/or window
opening position for the drives on the Solexa/ Arexa weather station (M1). It is
not possible to save an operating position for the drives on the motor control
unit (M2, M3) using the XS 2B control unit; an XS 1B-D control unit with display
is required.
For the procedure for saving an operating position, please see the "Basic
Settings" chapter for drives using the XS 1B-D control unit. In the event that the
XS 1B-D is subsequently not used for manual operation, this can be
disconnected from the system in accordance with the basic set-up, and
removed.
