47
Automatic functions for windows
To ensure optimal ventilation, values for automatic operation must be adjusted
to local conditions.
The following settings will need to be completed in succession:
A. Indoor temperature for opening
B. Outdoor temperature guard
C. Wind alarm
D. Rain alarm
E. Saving
A. Indoor temperature for opening
In automatic settings, you are first asked for the indoor temperature at which the
window shall be opened.
As soon as this value is exceeded, the
Automatic function opens the window
(unless the outdoor temperature guard
value drops below limit, see the next
parameter).
The default setting is 25°C.
Adjust the value by pressing
(higher) and (lower), or select
(Off) to
switch off this function. You can reach the
settings by pressing once
again when "5°C" is displayed. Selecting
means that there is no control
based on temperature. The following automatic function parameter (chapter B)
is therefore skipped. The window can be actuated manually and wind and rain
protection is active (if set, see chapters "C. Wind alarm" and "D. Rain alarm").
Press
to proceed to set the next parameter.
