Error messages & troubleshooting
299
18
Error messages & troubleshooting
18.1
Error messages and elimination of errors
Faults
Possible cause
Measure
The device does
not display a
function after
switching on
The external master switch
has been switched off.
Switch on the master
switch.
A fuse or circuit breaker
has triggered.
Check the fuses or circuit
breakers in the building's
distribution.
Ambient temperature of
the combi steamer was
below +4°C for a longer
period.
Heat the cooking chamber
to >20°C / >68°F
Only operate the
appliance in frost-proof
rooms.
The water in the
cooking chamber
does not drain
off.
The drain is blocked.
Clean the drain strainer.
Clean the device's drain
outlet.
Make sure that the
drainage system
provided by the user is
free.
White stains in
the cooking
chamber
Water hardness is too high.
Install a water softener or
replace the water
softener currently in use.
Black stains in the
cooking chamber
The water quality is poor.
Install a water filter or
replace the water filter
currently in use.
The wrong cleaner has
been used.
Use Eloma Multi-Clean
PRO Detergent Damage
caused by the wrong
cleaner cannot be
remedied.
Water dripping
from the device
door
The door seal is worn or
damaged.
Replace the door seal.
Unit does not
heat
Measuring mode is
switched on.
Switch off measuring
mode.
Tab. 69:
Description of faults, possible causes and measures
