eloProg - Vers. 1.0
41
eloProg safety designer SOFTWARE
The
"eloProg 350EPKS"
application software can be used to configure a logic diagram of the
connections between the eloProg ( expansions) and the components of the system being
developed.
The eloProg and its SLAVE units will thus monitor and control the connected safety components.
The configuration software uses a versatile graphic interface to establish the connections between
the various components, as described below:
Installing the software
PC HARDWARE requirements
• RAM:
256
MB
(adequate to run
Windows XP SP3
+
Framework 3.5
)
• Hard disk: > 100Mbyte of free space
• USB connector: 1.1 or 2.0
• CD-ROM
drive
PC SOFTWARE requirements
-
Windows XP with Service Pack 3 installed (or higher).
Î
Microsoft Framework 3.5 (or higher) must be installed on the PC
How to install the configuration software
• Insert the installation CD;
• Wait for the auto-run installer to request the SW setup program;
Alternatively follow the path D:/
• Double-click on the
eloProgSetup.exe
file;
When the installation procedure is complete a window is displayed asking you to close the
setup program.
