eloProg - Vers. 1.0
47
Creating the diagram (Figure 29)
Once you have selected your system composition, you are ready to configure the project.
The logic diagram is created using a
DRAG&DROP
function:
• Select the objects as required from the windows described previously (each single object is
described in detail in the following sections) and drag it into the design area.
• Now when you select the object the
PROPERTIES
the
window is enabled, where you must fill in
the fields as required.
• When you need to set a specific numerical value with a slide (ex: filter) use the left and right
arrows on your keyboard or click the sides of the slider of the slide.
• Connect the objects by moving the mouse over the required pin and then dragging it onto the
pin to be connected.
• If the scheme requires the PAN function (moving working area in the window), select the object
to move and use the arrow keys on your keyboard.
• When you need to delete an object or a link, select it and press DEL key on your keyboard.
Figure 29
OBJECT
PROPERTIES
WINDOW
Connection
start point
