elobau eloProg, Manual

Page: 17 / 83

eloProg - Vers. 1.0
17
485EPA02
TERMINAL SIGNAL TYPE DESCRIPTION OPERATION
1 24VDC - 24VDC power supply -
2 NODE_SEL1 Input
Node selection
Input
( "type B" according to EN 61131-2 )
3 NODE_SEL2 Input Input
( "type B" according to EN 61131-2 )
4 GND
- 0VDC power supply -
5 OSSD1_A Output
safety output 1
PNP active high
6 OSSD1_B Output PNP active high
7 RESTART_FBK1 Input Feedback/Restart 1 Input according to EN 61131-2
8 OUT_STATUS1 Output Condition of outputs 1A/1B PNP active high
9 OSSD2_A Output
safety output 2
PNP active high
10 OSSD2_B Output PNP active high
11 RESTART_FBK2
Input Feedback/Restart 2 Input according to EN 61131-2
12 OUT_STATUS2 Output Condition of outputs 2A/2B PNP active high
13 24VDC - 24VDC power supply OSSD1/2 power supply
14 n.c. - - -
15 GND - 0VDC power supply -
16 n.c. - - -
Table 7
485EPR04
TERMINAL SIGNAL TYPE DESCRIPTION OPERATION
1 24VDC - 24VDC power supply -
4 GND - 0VDC power supply -
5 OSSD1_A Input
Control ZONE 1 PNP active high
6 OSSD1_B Input
7 FBK_K1_K2_1
Output
Feedback K1K2 ZONE 1
N.C.
9 A_NC1 Output
NC contact ZONE 1
10 B_NC1 Output
13 A_NO11 Output
NO1 contact ZONE 1
14 B_NO11 Output
15 A_NO12 Output
NO2 contact ZONE 1
16 B_NO12 Output
11 A_NC2 Output
NC contact ZONE 2
12 B_NC2 Output
17 OSSD2_A Input
Control ZONE 2 PNP active high
18 OSSD2_B Input
19 FBK_K1_K2_2 Output Feedback K1K2 ZONE 2 N.C.
21 A_NO21 Output
NO1 contact ZONE 2
22 B_NO21 Output
23 A_NO22 Output
NO2 contact ZONE 2
24 B_NO22 Output
Table 8