MEDEA Programming Manual
81
The table shows the possible actions with their parameters.
Action
Description
Parameters
None
No action is triggered
System
It is used to arm and disarm all the enabled
sectors of the system, taking any own
blocks (open inputs, tampering or faults)
into account.
Disinsert
= total intrusion alarm
disarming
Insert
= total intrusion alarm arming
Output
This performs the action on the associated
output (None = no associated output). All
outputs of the system are listed.
Deactivate= deactivate the output
Activate = activate the output
Sector
This performs the action on the associated
sector (
None
= no associated sector). All
areas of the system are listed.
Switch off = disarm sector
Switch on = arm sector
Code group
This performs the action on the codes of
the selected group. All the codes of the
group obey the same choice within their
prerogatives.
Lock = the code is blocked
Insert only = the code can only be
used to arm the intrusion alarm
Unlock = the code can be used to
perform all the permitted actions
Key group
This performs the action on the keys of the
selected group. All the keys of the group
obey the same choice within their
prerogatives.
Lock = the key is inhibited
Insert only = the key can only be
used to arm the intrusion alarm
Unlock = the key can be used to
perform all the permitted actions
Scenario
This activates the selected scenario (
None
= no scenario selected). All scenarios of the
system are listed.
Table 13 - Possible actions of the daily schedule
NOTES
: Each code or key can have different privileges within a group. These privileges are retained
when the group is unlocked.
Enable the ability for the start of the action to be delayed (
Delayable Action
), if appropriate.
When the option is enabled, during the insertion warning, the delay menu appears on the keypad, it
is possible to indicate how long to delay the action in steps of 30 minutes.
Click on the
Save
button to save the changes, the
Close
button to close the window and not save the
changes.
4. Double-click on the first day of the weekly schedule table.
Figure 78 - Weekly schedule
Select the program that will run that day of all weeks in the pop-up window that opens. Click on the
Save
button to save the changes, the
Close
button to close the window and not save the changes.
Repeat for all days of the week (the same type of schedule can be common for several days of the
week).
