MEDEA Programming Manual
45
The following buttons appear under the table:
•
Modify
: This can be used to enable and disable the photo sensor highlighted in the table.
•
Remove
: This eliminates the photo sensor highlighted in the table.
•
CSV
: This can be used to export the photo sensors table to a
“.csv” file, which can be opened with a
spreadsheet.
•
: This can be used to export the photo sensor table to a PDF file.
The
<
and
>
buttons at the bottom right are used to navigate between the pages of the photo sensors, if
their number is greater than the number that can be displayed in a single screen.
4.7.2
Detectors with Video Camera
This can be used to enable and disable the ZigBee video sensors.
It is accessed through the
CONFIGURATION
→ Zigbee Peripherals
menu.
Figure 35 - ZigBee video sensor
The available parameters and functions are the same as those of the photo sensors (
paragraph 4.7.1
), to
which you can refer for descriptions.
4.7.3
Repeaters
This can be used to enable and disable the ZigBee repeaters.
It is accessed through the
CONFIGURATION
→ Zigbee Peripherals
menu.
Figure 36 - ZigBee repeaters
The available parameters and functions are the same as those of the photo sensors (
paragraph 4.7.1
), to
which you can refer for descriptions.
