64
MEDEA Programming Manual
5.7
Association of outputs to sector statuses
This can be used to view and associate the predefined events of the various sectors to the outputs of the
system.
It is accessed through the
PROGRAMMING
→ Output associations
menu.
Figure 55 - Association of outputs to sector statuses
All default sector events are listed and, for each event and sector, the output(s) that are activated when the
event occurs. Remember that also the status of the sector (intrusion alarm armed or intrusion alarm
disarmed) can determine if the output is activated or not. The outputs are identified by their physical address.
Double-click on the event line opens a pop-up window, in which you can select from a drop-down menu
(one for each enabled sector) one or more outputs to be activated should that event occur. To select
multiple outputs from the same sector, click on each of them. To deselect the output just click on it.
Figure 56 - Association of outputs to sector statuses
The following buttons appear under the table:
•
Modify
: This can be used to edit the outputs associated with the event highlighted in the table.
•
CSV
: This can be used to export the table showing pairings between sector states and outputs to a
“.csv” file, which can be opened with a spreadsheet.
•
: This can be used to export the table showing pairings between sector states and outputs to a PDF file.
The
<
and
>
buttons at the bottom right are used to navigate between the pages of the user keys, if their
number is greater than the number that can be displayed in a single screen.
