Elkron MEDEA Programming Manual Download Page 55

Page: 55 / 136

MEDEA Programming Manual

The following table shows the behaviour of the different activation modes:

Status of sector

inputs upon arming

Standard

Auto-inhibit

Activation-lock

No open input

Arm sector

1 or more open inputs
(up to 70% of the total)

Arm alarm

Arm

inhibit open inputs

Sector not armed

More than 70% of
inputs open

Arm alarm

Sector not armed

Table 12 - Arming behaviour of sectors

Double-click on the sector line to open a pop-up window that can be used to enable and disable the sector,
add an identification description (e.g. perimeter protection, garage etc.) and configure the Arming Mode.
The text entered in

Description

is used to generate the voice messages. Use only alphabetic characters,

including accented characters, numbers, and spaces.
Click on the

Save

button to save the changes, the

Close

button to close the window and not save the

changes.

The following buttons (some are enabled only by highlighting a sector of the table) are shown below:

•

Modify

: This can be used to edit the parameters of the sector highlighted in the table.

•

CSV

: This can be used to export the sectors table to a

“.csv” file, which can be opened with a

spreadsheet.

•

PDF

: This can be used to export the sectors table to a PDF file.

The

and

buttons at the bottom right are used to navigate between the pages of the sectors, if their

number is greater than the number that can be displayed in a single screen.

Summary of Contents for MEDEA









































































































































Search results

Summary of Contents for MEDEA

Reviews:

Related manuals for MEDEA

Brands by name

Popular brands

Elkron MEDEA, Programming Manual

Search results

Summary of Contents for MEDEA

Reviews:

Related manuals for MEDEA

Brands by name

Popular brands