100
MEDEA Programming Manual
Double-click on the camera module line to open a pop-up window.
•
Enable the camera.
•
Enter the camera description.
•
Enter the type of camera (Dahua, Elkron, Hikvision and Onvif.)
•
Enter the IP address of the camera.
•
Enter the username of the camera. (Refer to your documentation of the camera).
•
Enter the password. (Refer to your documentation of the camera).
•
Determine the number of frames (pictures) to be stored in the event of an alarm.
The
Configure
button provides access to the configuration page of the camera when connected locally.
The
Test Presence Test
button is used to verify the presence of the camera on the network at the
configured address.
The following buttons appear under the table:
•
Add
: This can be used to add a new camera.
•
Modify
: This can be used to configure the camera highlighted in the table.
•
Remove
: This can be used to remove the camera.
•
CSV
: This can be used to export the cameras table to a
“.csv” file, which can be opened with a
spreadsheet.
•
: This can be used to export the cameras table to a PDF file.
