Eliet Prof 6 Page 4 Manual Download | Manualshive

Page: 4 / 92

background image

4

English

3. Welcome

Welcome to the family of ELIET customers.

We would like to thank you for the confidence that you have placed in ELIET and we are convin-
ced that you have purchased the very best machine. The operating life of your ELIET machine de-
pends to a great extent on how you use your machine. This user manual and the engine manual
that has also been provided with your machine will assist you in this respect. If you follow the
instructions and suggestions in these manuals, you can be assured that your ELIET machine will
operate for a very long time in optimal condition.

We recommend that you carefully read this manual. This will prevent any incorrect operation of
the machine that might have serious consequences.
It is also in your best interest to carefully read the chapter specific to safety instructions. Even if
you are thoroughly familiar with operating this type of machine, it is still strongly recommended
that you carefully read this manual.

At ELIET, we are constantly in the process of perfecting our machines and equipment. As such,
all of our products are subject to slight modifications, both in regards to their configuration and
accessories, as well as to the included technology. The descriptions and technical data in this
manual are accurate as of the time of printing. Certain illustrations and descriptions may not be
applicable to the machine that you have purchased, but instead relate to a different version of
the machine. As such, we trust that you will understand that we take no responsibility for claims
made in regards to the text and illustrations included in this manual. If you still have questions
after having read this manual, please do not hesitate to contact your ELIET dealer. You will find
an authorised ELIET dealer near you at

www.eliet.eu

.

ELIET AT YOUR SERVICE

During office hours, the ELIET helpdesk is always at your service to answer your questions:
European customers:

U.S. customers:

GMT +1: from 8:00 a.m. to 4:00 p.m. GMT -5: 8 a.m. to 5 p.m.
Telephone: +32 56 77 70 88

Ph +1 412 367 5185

Fax: +32 56 77 52 13

Fax +1 412 774 1970

[email protected] [email protected]
www.elietmachines.com www.elietusa.com

«
...
2
3
4
5
6
...
»

Summary of Contents for Prof 6





























































































Reviews:

No comments

Related manuals for Prof 6

Brand: Hama Pages: 62

Brand: ALZA Pages: 6

IDEAL 8220 shredcat

Brand: Kunde Pages: 8

POWERSHRED P-33

Brand: Fellowes Pages: 4

Powershred P-28S

Brand: Fellowes Pages: 4

POWERSHRED H-5C

Brand: Fellowes Pages: 8

POWERSHRED DS-13C

Brand: Fellowes Pages: 8

Brand: Grizzly Tools Pages: 140

Brand: STERWINS Pages: 204

Brand: Cub Cadet Pages: 40

Brand: Cub Cadet Pages: 60

Brand: HSM Pages: 68

Brand: HSM Pages: 93

Brand: HSM Pages: 93

Brand: Royal Pages: 4

Brand: Royal Pages: 8

Brand: Feider Machines Pages: 26

Brand: Omega Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands