Eliet Prof 6, Manual

Page: 37 / 92

37
English
• There are two handles. They are both connected, which enables you to work on either side of
the shredder and to avoid any risks from projectiles by standing in front of the hopper.
• You should preferably stand to the side of the feeding hopper when putting green waste into
it. This will keep you out of the path of any wood chips that might still be ejected past the anti-
projectile shield.
• Feed the green waste into the hopper and guide it towards the anti-projectile shield. In the case
of loose waste (leaves, etc.), use a branch or the remaining waste to be shredded to push the
material towards the shield. (DO NOT USE a shovel or a garden fork).
• In the case of branches, it is recommended to feed in the thickest part of the branch first.
• Never use a footstep to feed green waste into the hopper.
• In order to ensure more intense shredding and smaller wood chips, it is recommended to feed
the waste into the hopper along the right side of the infeed hopper. This will ensure that the
chips travel through the entire shredding chamber before they are ejected. The result is a finer
cut.
BQ 501 050 210
handle handle
BQ 501 050 220