manualshive.com logo in svg

Eliet Prof 6, Manual

Share
Download
Eliet Prof 6 Manual Download Page 8

8

English

12. Storing the machine ...................................................................................................................76
13. Options ........................................................................................................................................77
14. Risks ............................................................................................................................................78
15. Equipment  specifications ......................................................................................................... 80
16. EC Declaration of Conformity ................................................................................................... 81
17. Appendices ................................................................................................................................. 82

17.1.  Specifications for lubricants and fuel ...........................................................................................82
17.2.  Torque chart ........................................................................................................................................83
17.3.  Error identification ........................................................................................................................... 84
17.4. Troubleshooting ................................................................................................................................. 86

17.4.1.  Blade shaft becomes blocked ............................................................................................. 86
17.4.2. Engine shuts off ..................................................................................................................... 86
17.4.3. Engine stalls ............................................................................................................................ 86
17.4.4. Starter does not react while starting engine.................................................................. 86
17.4.5. Capacity decreases ............................................................................................................... 86
17.4.6. Wheel drive does not function while petrol (UK)/ gas (USA) engine is running ..........
86
17.4.7.  Feed roller no longer functions ...........................................................................................87
17.4.8. Engine shuts off and the machine must be moved - ZR model ..................................87

18. Warranty  conditions .................................................................................................................. 88

Summary of Contents for Prof 6





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands