66
English
For your information:
Each blade has two sides (illustration)
Front side (F):
the bevelled cutting edge is visible.
Back side (B):
The side with the clearly visible tooth profile.
A. Turning / replacing blades in group 1
Rule:
Ensure that the blades in group 1
are always oriented with their back sides
(B)
facing the side walls of the shredding
chamber.
Perform the following steps to ensure
that this rule is applied consistently.
• Remove a single blade from the left-side blade disc, rotate it
180° and put it back in the same position, but on the right-side
blade disc. Rotate (180°) the blade previously removed from
the right-hand blade disk, and fit it in the empty space in the
left-hand blade disk.
• Repeat this procedure until all 8 blades from group 1 in both
discs have been repositioned.
• Always clean the blades and blade holders before refitting
them.
B. Turning / replacing blades in group 2
Rule:
Every blade disc has four blade positions. The blades are positioned at an angle for two
positions
(1)
, whereas they are relatively straight for the two other positions
(2)
. The front
side
(F)
of the angled blades must always be facing the shaft. For the straight blades, the
(F)
(B)
B
B
B
B
B
B
B
B
(1)
F
F
F
F
(2)
Summary of Contents for Prof 6
Page 1: ...Prof 6 M A N U A L ...
Page 90: ...90 English ...
Page 91: ...91 English ...
Page 92: ...92 English BZ 201 450 003 ...
