manualshive.com logo in svg

Eliet Prof 6, Manual

Share
Download
Eliet Prof 6 Manual Download Page 19

19

English

Parking brake:

The parking brake ensures that the machine does not move while 
you are working or transporting it. The brake keeps the machine 
stationary in one spot, in order to avoid any potential mishaps 
after it has been moved.

Anti-projection shield:

The flexible safety screen fitted inside the infeed opening protects 
the operator against flying wood chips. Under no circumstances 
should you place your hands beyond this flexible, transparent 
screen.
The operator must remain aware that lifting this screen means 
losing the protection it provides and increases risks of injuries.
It is to be replaced in the event that it is damaged.
(item code: BR 902 000 010)

Safety kit:

Because we here at ELIET are concerned for your safety, we can-
not insist enough the importance of using all of the protective 
gear included in the standard safety kit that we supply. This kit 
contains your Personal Protective Equipment (PPE): safety glas-
ses, hearing protectors and a pair of multi-purpose gloves.

Warning: 

Never try to deactivate or avoid the safety features. The safety 

measures are meant for your own personal safety. Before beginning to work, 
the operator must verify that all protective equipment is functioning properly. 
In the event that a defect is detected, first complete any repairs that are neces-
sary.

Summary of Contents for Prof 6





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands