manualshive.com logo in svg

Eliet Prof 6, Manual

Share
Download
Eliet Prof 6 Manual Download Page 76

76

English

12.  Storing the machine

• Clean the machine. See “11.2.2. Daily maintenance”, page 50.
• Store the machine in a dry place that is protected from rain, and if necessary, cover it with a 

tarpaulin.

• Always allow the machine to cool down before storage.
• If the machine needs to be stored outside, it must be well protected with a tarpaulin. Try to 

avoid allowing the machine to be exposed to bad weather. At ELIET, we strongly recommend 
that the machine be stored in a dry location.

• Before storing the machine for longer periods, it is recommended to perform the following 

steps:

• Conduct maintenance after 50 hours.  

See “11.2.6. Maintenance after 50 hours of use”, page 51.

• Check all nuts and bolts for correct tightness, retighten them if necessary.
• Touch up or lubricate areas where the paint coating has been removed to prevent rusting. 

Original ELIET paints in the same colour are available from your ELIET dealer (article num-
ber: BX 043 200 400).

Summary of Contents for Prof 6





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands