Eliet Prof 6 Manual Download | Manualshive

Page: 29 / 92

background image

29

English

9.4. Starting and turning off the engine

Warning:

Never start the machine if the engine cooling fins are not clean or

free of debris to protect the engine from overheating.

For your information:

Also read the engine manual that has been provided.

Warning:

Under no circumstances should the engine ever be started in an

enclosed space for more than 30 consecutive seconds. Exhaust gases contain
toxic substances and may lead to poisoning or suffocation.

Caution:

Ensure that no unauthorised persons are within a radius of 10 m - 30 ft

around the machine before starting the engine.

Caution:

Ensure that the blow chute has been placed into the working position

and that the deflector has been lowered before starting the engine.

Warning:

The blades begin moving as soon as the engine is started. If there are

any wood chips still remaining in the shredder or the turbine, they will be pro-
jected from the machine. Ensure that no one is present in the projection zone.

Before starting the engine, check that there is sufficient oil and fuel in the engine. If necessary,
read the following sections:
• See “11.4.1. Checking engine oil level + refilling”, page 56.
• See “9.2. Filling up with fuel”, page 27.

Warning:

Before starting up the machine, protect your ears with hearing protec-

tors and your eyes with the safety goggles.

• Ensure that the shredding chamber and turbo are empty, in order to avoid overloading the

starter mechanism.

• Ensure that the feeding hopper is empty (no green waste, no tools, etc.).
• Set the deflector to the "working position".

«
...
27
28
29
30
31
...
»

Summary of Contents for Prof 6





























































































Reviews:

No comments

Related manuals for Prof 6

Brand: KRUG+PRIESTER Pages: 40

Brand: Techko Pages: 4

Brand: Hama Pages: 62

Brand: LOFTNESS Pages: 42

ECOPAX CP422S2-240V

Brand: optimax Pages: 6

Brand: Central Machinery Pages: 21

Brand: RADLEY Pages: 24

Brand: Opus Pages: 4

Brand: Hama Pages: 8

Brand: Gardenline Pages: 14

Brand: Ryobi Pages: 32

LEO 320 PROFESSIONAL

Brand: Talex Pages: 36

Brand: UNITED OFFICE Pages: 28

Brand: Fellowes Pages: 8

Brand: Scheppach Pages: 96

Brand: Linear Pages: 2

Brand: Jonco Pages: 46

Brand: Eliet Pages: 59

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands