manualshive.com logo in svg

Eliet Prof 6, Manual

Share
Download
Eliet Prof 6 Manual Download Page 3

3

English

1. 

Introduction 

1.1.  Read this manual

ELIET machines are designed for safe and reliable use, if they are operated in accordance with 
the instructions provided. Carefully read this manual before using the machine. Neglecting to do 
so could result in bodily injury or material damage.

1.2.  Identification data – ELIET Prof 6

Write the identification data of your machine in the boxed areas:

Type number:

Engine:

Serial number:

Year of Manufacture:

2.  Warranty 

2.1.  Registering your machine 

In order to be able to make a warranty claim, you will need to register your machine online within 
one month after purchase: 

www.eliet.eu

European customers: 

U.S. customers:

ELIET EUROPE S.A. 

ELIET USA Inc.

Diesveldstraat 2 

3361 Stafford Street

8553 Otegem 

Pittsburgh, PA 15204

T

 (+32)(0)56 77 70 88 - 

F

 (+32)(0)56 77 52 13 

Ph 

+1 412 367 5185 - 

Fax

 +1 412 774 1970

e-mail: [email protected], www.eliet.eu  

e-mail: [email protected], www.elietusa.com

Read the warranty conditions (see Section 17, page 82) 

Summary of Contents for Prof 6





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands