Eliet Prof 6, Manual

Page: 14 / 92

14
English
3.
The sticker located on the left side of the hopper is a reminder of
the maximum diameter of a branch that can be shredded
(<10 cm - 4”). There is a risk of wood chips being ejected from the
hopper. Anyone standing within 10 metres - 30 ft of the machine
must be wearing safety goggles while the engine is running.
(item code: BQ 505 010 570)
4.
This sticker located on the belt guard indicates that a belt is
found behind the guard. The machine is never to be operated with
the safety guard removed, as this could lead to the operator's
hands being crushed. Before any interventions on the machine,
please carefully read the maintenance manual. You must wait a
minimum of 1 minute after shutting off the machine to make sure
that all moving parts have completely stopped before underta-
king any interventions. For all maintenance operations, the engine
must be turned off and the operator must refer to the user
manual. Never operate the machine without all the safety guards
mounted in place.
(item code: BQ 505 010 600)
5.
This sticker is located on the deflector and contains a warning
related to the risk of injury that could occur if you are standing
within the shredder ejection zone while the engine is running.
This apply to anyone standing within 10 metres - 30 ft of the
machine.
(item code: BQ 505 014 100)
6.
The blow chute can be folded over in order to make the unit smal-
ler for transport. This sticker, located on the blow chute and the
shredding chamber, warns the operator of the danger of either
catching or cutting their fingers while folding the chute. The stic-
ker also indicates that it is necessary to first turn off the engine
before folding the chute. Your hands should never be placed into
the blow chute or the shredding chamber for any reason. There
is an imminent risk of wood chips being ejected from the blow
chute.
(item code: BQ 501 050 270 and BQ 505 010 590)