A-1 Appendix
PS-6144 Controller Specs
Electrical
Input Power
20-30 VDC. Keypad/display is powered from controller.
Input Current
500 mA maximum (control only)
Power Consumption:
35 W
Permanent Memory:
EEPROM (no battery required)
Accessory Power Out:
20-30 VDC, 250 mA Max (same source and voltage as input power)
Environment
Operating Temp:
0° to 55°C (32 ° to 131°F)
Storage Temp:
-40° to 70°C (-40° to 160°F)
Humidity:
95% maximum relative non-condensing
NEMA Rating:
Keypad/Display: NEMA 4
Physical
Overall Dimensions:
See Figure 4
Weight:
Controller: 3.5 lbs (1.6 kg). Keypad/Display: 0.5 lbs. (0.2 kg)
Mounting
Controller:
Brackets accept EN-50035 (“G” profile) or EN-50022 (“Top Hat” profile) DIN rail.
Keypad/Display:
Mounts up to 1000' from controller. Multiple keypads may be connected to one controller.
Inputs
DC Inputs:
16 sinking or sourcing DC inputs, optically isolated.
Input ON State Voltage:
10-30 VDC
Input Current:
11 mA @ 24 VDC
Program Select Response:
100 ms typical; may be longer with large numbers of setpoints.
Response of All Other Inputs: 1-2 scans
Outputs: PS-6144-24-(P16 or N16)M09
Real World Outputs:
Up to nine Slimline modules may be mounted on controller. Modules may be any mix of AC,
DC, reed relay, and up to two analog. All modules optically isolated.
DC (Transistor) Outputs:
16 sinking (N16) or sourcing (P16), optically isolated. Sinking or sourcing must be specified on
order.
Outputs: PS-6144-24-M17
Real World Outputs:
Up to 17 Slimline modules may be mounted on controller. Modules may be any mix of AC, DC,
reed relay, and up to two analog. All modules optically isolated.
Analog Output
Output Types:
4-20 mA or 0-10 VDC, proportional to RPM.
Resolution:
12 bit
Update Frequency:
10 times/sec minimum
Linearity:
±0.3% of full scale @ 25°C (77°F)
Set-up:
Offset and full scale RPM are programmable.
Operation
Scan Time:
300-500 µs (exact time determined by programming)
For higher speeds, interrupt-driven versions available—consult factory.
Position Resolution:
10 bits (1024 increments). 12 bits (4096 increments) available with “-H” option.
Speed Compensation:
Programmed in 0.1 msec steps. 16 individually compensated outputs max. Updated ten times
per second. Separate leading/trailing edge compensation available with option “-L” (update time
typically five times per second).
Output Timeout:
1.0 ms time base (accuracy: +1, -0 ms)
Number of Timed Outputs:
Four maximum
Multiple Programs:
48 programs standard (256 available with “-F” Option)
Total Pulse Memory:
1258 pulses standard (4589 available with “-F” Option)
Pulses per Program:
512 maximum standard (512 available with “-F” Option)
Pulses per Output:
512 maximum standard (512 available with “-F” Option)
Maximum Speed:
3000 RPM
RS-232 Serial Communication
Port Types:
1 RS-282 or 1 RS-422/485—R-485 can be configured as a “Multi-Drop” network.
Baud Rates:
4800, 9600, 19.2K, 38.4K
Summary of Contents for Plus PS-6144 Series
