Electro Cam Plus PS-6144 Series, Programming & Installation Manual

Page: 97 / 116

6-23 Communications
Registers (Cont'd)
Display Configuration
40324 Speed Comp Display Mode
Read/write
Values: 0 = One, 1 = L/T
Specifies whether speed comp values are displayed as one value for both leading and trailing
edges, or as a value for each.
40325 Group Position Display Mode
Read/write
Values: 0 = Each, 1 = One
Specifies whether the positions for output groups are individually displayed, or if they are
displayed as one value for all groups. Output group positions can only be displayed as one if
none are in mode 1 or mode 2 (rezero modes).
Password ID Numbers
40326 Operator ID
Read/write
Values: 0 - n
Specifies the Operator ID number used to enable the Operator access level for programming.
40327 Setup ID
Read/write
Values: 0 - n
Specifies the Setup ID number used to enable the Setup access level for programming.
40328 Master ID
Read/write
Values: 0 - n
Specifies the Master ID number used to enable the Master access level for programming.
Per Channel Enable
40329 Per Channel Enable Index
Read/write
Values: 1 - Max Channel Number
Channel index for the Per Channel Enable register.
40330 Per Channel Enable
Read/write
Values: 0=No Operator access, 1=Operator access enabled
Specifies whether channel data can be modified under the Operator access level (0=no,
1=yes).
Channel data such as speed comp and timed output values can be individually enabled per
channel for operator access through this register.
Operator Function Enable
40331 Operator Function Enable Bitmask
Read/write
Values: 0 - 0FFFFH
Bit mask which specifies which programming functions the operator may perform.
Bit 0: Pulse on/off values.
Bit 1: Default program.
Bit 2: Speed compensation.
Bit 3: Timed outputs.
Bit 4: Offsets.
Bit 5: Motion detection.
Bit 6: Analog offset & high rpm.