Eizo SCD 19102, Instruction Manual

Page: 62 / 104

Commissioning
7.4 Make settings
SCD 19102 / SMD 19102
62
Instruction Manual, 05/2008, A5E01588521A-002
Live mode
Timings whose setting values are unknown can be set step-by-step in Live mode using test
patterns. The changes in the test pattern are output live on the display.
See "Live mode " (Page 66).
Note
Only one timing can be saved
7.4.6.2 Foreword (a number of useful points to facilitate understanding of timing and the various
types of timing)
Scanning in the interlaced and non-interlaced procedures
There are two different scanning systems. They differ in the technology used to display the
image on the screen TV signals and displays which are compatible with them are normally
set to the interlaced procedure, computer signals and displays compatible with them are
normally set to the non-interlaced procedure. These two formats are not compatible; one of
them must first be converted before the signals can be processed together. In the case of
interlaced scanning, each image is divided into two separate fields. An image therefore
comprises two fields. An interlaced image is output on the screen in two scans. The
horizontal lines of the first field are scanned first, and then, again starting at the top of the
image, the horizontal lines of the second field are scanned between the first set of lines.
Field 1 consists of the lines 1 to 262 1/2, and field 2 of the lines 262 1/2 to 525. Only a few
lines are displayed at the top and bottom of each field.
3LFWXUH
6FUHHQ
)LHOG
6FDQOLQH
5HWUDFH
127(([DJJHUDWHGLQWKHYHUWLFDO
GLPHQVLRQIRUFODULW\
)LHOG
Figure 7-4 Interlaced scanning system
An interlaced image is output on the screen in that all horizontal lines are scanned from top
to bottom in one scan.