Eizo SCD 19102, Instruction Manual

Page: 27 / 104

Connecting
6.6 DIP switches (for SMD 19102 only)
SCD 19102 / SMD 19102
Instruction Manual, 05/2008, A5E01588521A-002
27
BNC socket (video input)
● Connect video cable for the composite input to the BNC socket.
See also
Connector panel (Page 25)
Safety notes (Page 11)
6.6 DIP switches (for SMD 19102 only)
The SMD 19102 has two DIP switches between the three BNC sockets.
These switches are used for changeover between high impedance (10 kΩ) and low
impedance (75 Ω) for the H and V synchronization inputs.
6: 6:
Figure 6-4 Position of the DIP switches
Delivery state
Switch Function Delivery state
SW1 Input resistance for H/H+V
signal
75 Ω
SW2 Input resistance for V signal 75 Ω