Eizo SCD 19102, Instruction Manual

Page: 70 / 104

Commissioning
7.4 Make settings
SCD 19102 / SMD 19102
70
Instruction Manual, 05/2008, A5E01588521A-002
6. Correct the values in the "Vertical resolution" input field until the bottom internal border of
the gray/blue area is pixel-exact at the bottom edge of the SMPTE image.
7. Execute "Force"
command using key 2.
Timing successfully set
The unknown timing has been successfully set, you can now exit the OSD menu. The
display will recognize the newly set timing and set it as saved whenever connected in the
future.
Note
Desired zoom factor selectable in "Live mode" following completion of all settings
Once all settings have been carried out in Force Mode, the desired zoom factor can be
selected from the "Position/Zoom" menu.
Further use of determined values
The values determined step-by-step using "Live mode" can now be copied and entered
directly in further displays using "Blind mode".