Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 6: Remote Commands
Efficient Networks
®
Page 6-5
remote setppppretrytimer
Enables or disables the PPP retry timer for a remote
session.
remote setprefer
Changes the interface for the remote entry.
remote setprotocol
Sets the link protocol for the remote router.
remote setpvc
Specifies the PVC number for connecting to the remote
router.
remote setrmtipaddr
Sets the WAN IP address for the remote router.
remote setspeed
Specifies the speed to be used when dialing out using
the backup V.90 modem connected to the console port.
remote setsrcipaddr
Sets the IP address for the target WAN connection to
the remote router.
remote settimer
Sets the length of the timeout period before disconnec-
tion.
remote start
If the remote is not currently active, this command at-
tempts to start an active session.
remote stats
Shows the current status of the connection to the re-
mote router, including the bandwidth and data transfer
rate.
remote stop
If the remote is active, this command stops the active
session.
remote unbindipvirtual-
route
Removes a remote route from the named IP virtual rout-
ing table.
Table 6-1: Remote Command Listing (Cont.)
Command
Function
