Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 19: SSH Commands
Efficient Networks
®
Page 19-1
CHAPTER 19
CHAPTER 19
SSH COMMANDS
The commands in this section are used to Secure Shell (SSH) connections. For
additional information Secure Shell, see
SSH
in
Chapter 5, System Security
.
The commands found in this section include:
Table 19-1: SSH Command Listing
Command
Function
ssh ?
List the supported SSH sub-commands.
ssh keygen
Generates the Private-Public key-pair for the local
server.
ssh list
Displays the current SSH configuration with the ex-
ception of the list of public-private key pairs and the
configured SSH port.
ssh load privatekey
Loads a precomputed private-key, from the speci-
fied TFTP server.
ssh load publickey
Loads a precomputed public-key, from the speci-
fied TFTP server.
ssh set encryption
Sets the type of encryption the SSH connections
will use.
ssh set idletimeout
Sets the idle timeout period for SSH connections.
ssh set keepalive
Enables and disables keepalive messages trans-
mission.
ssh set mac
Sets the type of message authentication code use
for SSH connections.
ssh set rekey
Sets the interval between key re-exchange.
ssh set status
Enables and disables SSH connections.
system sshport
Manages system SSH port access.
