Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 6: Remote Commands
Efficient Networks
®
Page 6-65
remote setspeed
Specifies the speed to be used when dialing out using the backup V.90 modem
connected to the console port. Specify a speed for each phone number you provide
(primary and alternative).
For more information specifying phone numbers for the Dial Backup feature, see
“
Specifying the Dialup Parameters” on page 6-9.
Mgmt Class
Network (R/W)
Input Format
remote setspeed <bitrate> | default async 1 | 2 <remotename>
Parameters
Examples
The following command specifies the primary phone number and its bit rate.
The following commands specifies the alternative phone number to be used and its bit
rate.
Response
Command prompt.
<bitrate>
a
a
Range - possible speeds are 38400, 57600, 115200, or 230400.
Bit rate to be used for the phone number.
default
Use the default speed.
1
Primary phone number.
2
Alternative phone number.
<remotename>
b
b
ASCII string
Name of the remote router.
-> remote setphone async 1 9,5551288 backup
-> remote setspeed 115200 async 1 backup
-> remote setphone async 2 9,5551289 backup
-> remote setspeed 115200 async 2 backup
