Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 6: Remote Commands
Efficient Networks
®
Page 6-11
remote addipxroute
Adds an IPX route for a network or station on the LAN network connected beyond the
remote router. The target router’s routing information table must be seeded statically
to access networks and stations beyond this remote router. After the connection is
established, standard RIP update packets will dynamically add to the routing table.
(Setting this address is not required if a target router never connects to the remote
router and the remote router supports RIP.)
NOTE:
A
reboot
command must be performed on the target router for the addition of a static
route to take effect.
Mgmt Class
Network (R/W)
Input Format
remote addIpxRoute <ipxne#> <metric> <ticks> <remotename>
Parameters
Response
Command prompt.
<ipne#>
a
a
Hexadecimal notation
IPX network number.
<metric>
b
b
Integer
Number of routers through which the packet must go to get to the
network/station.
<ticks>
b
Number in 1/8 seconds which is the estimated time delay in reach-
ing the remote network or station.
<remotename>
c
c
ASCII string
Name of the remote router.
